GATE Exam Pattern and Marking Scheme Explained

The gate exam pattern is the same across all 30 GATE papers: a three-hour computer-based test of 65 questions carrying 100 marks. This guide explains the pattern exactly as the official GATE 2026 information brochure and question paper pattern page state it — the number and types of questions, how the 100 marks are divided, and the negative marking rules. Read it before you start preparing, because the pattern decides how you should use your three hours.

On this page

The answer in short

Each GATE paper has 65 questions — 10 from General Aptitude and 55 from the subject — carrying 100 marks in total, to be answered in three hours. Questions are of three types: multiple choice (MCQ), multiple select (MSQ) and numerical answer type (NAT). General Aptitude is worth 15 marks; in the science papers XL, PH, CY and MA, the subject is worth 85 marks. Questions carry one or two marks, and wrong answers to MCQs lose marks: one-third of a mark for a one-mark question and two-thirds for a two-mark question. There is no negative marking for MSQ or NAT questions, and no partial marking anywhere.

The gate exam pattern at a glance

Mode of examination: computer-based test (CBT). Language: English. Duration: three hours. Number of papers: 30 test papers. Sections: General Aptitude plus the candidate’s selected subject or subjects. Types of questions: multiple choice (MCQ), multiple select (MSQ) and numerical answer type (NAT). Number of questions: 10 General Aptitude + 55 subject = 65 questions. Total marks: 100. Abilities tested: recall, comprehension, application, and analysis and synthesis. Candidates with a benchmark disability are eligible for one hour of compensatory time.

Sections and marks

Every GATE paper has two sections. General Aptitude is common to all papers and carries 15 marks. In the science papers — XL, PH, CY and MA — the subject section carries 85 marks, making the total 100. In most other papers the subject section is split: 13 marks for Engineering Mathematics and 72 marks for the subject, with General Aptitude at 15, again totalling 100. The exception is the XE paper, where the Engineering Mathematics section (XE-A) carries 15 marks. The split matters for preparation: in a science paper, the subject is 85 percent of the paper, so subject preparation dominates, but the 15 marks of General Aptitude are the same for everyone and are often the easiest marks to secure.

Question types

GATE uses three question types. In a multiple choice question (MCQ), you choose one correct option from the choices given. In a multiple select question (MSQ), one or more options may be correct, and you must select all the correct ones; there is no partial marking, so a partly correct selection earns no marks. In a numerical answer type (NAT) question, you type a number as your answer using the on-screen virtual keyboard — there are no options to choose from, and no negative marking applies. All three types can carry one mark or two marks.

The marking scheme

Each question carries one mark or two marks, and the total for the paper is 100. A correct answer earns the full marks of the question. For multiple select questions, there is no partial marking: you must select exactly the correct set of options to earn the marks. For numerical answer type questions, the answer is evaluated as a number. Your marks are then converted into a GATE score, and the qualifying marks for each paper are announced with the results.

Negative marking

Negative marking applies only to multiple choice questions. For a wrong answer to a one-mark MCQ, one-third of a mark is deducted. For a wrong answer to a two-mark MCQ, two-thirds of a mark is deducted. There is no negative marking for wrong answers to MSQ and NAT questions. There is no partial marking for any question. Because of this, guessing on MCQs carries a real cost, while MSQ and NAT questions can be attempted without the risk of losing marks — although a wrong MSQ selection still earns no marks, and a wrong NAT answer earns none either. Unattempted questions carry no marks and no penalty. Note that a candidate’s net total marks can be negative, as the official FAQ points out, if wrong MCQ answers outweigh correct ones.

What the pattern means for science papers

In XL, PH, CY and MA, 85 of the 100 marks come from the subject, so subject knowledge decides most of the result. The 10 General Aptitude questions are worth 15 marks and are the same for every candidate, so they are the most predictable part of the paper. In XL, the subject marks are divided into 25 for the compulsory chemistry section and 30 each for the two optional sections you choose, which means your choice of optional sections shapes almost a third of your paper each. Across all four papers, the two-mark questions carry twice the weight of one-mark questions and twice the negative marking, so accuracy matters more than attempts. The official mock tests on the GATE website use the same pattern, so use them to practise the real timing.

Checklist: know the pattern before you practise

  • 65 questions, 100 marks, 3 hours — plan your time per question.
  • General Aptitude is 15 marks in every paper.
  • In XL, PH, CY and MA, the subject is 85 marks.
  • MCQ wrong answers lose 1/3 or 2/3 of a mark; MSQ and NAT have no negative marking.
  • No partial marking in MSQ — select the full correct set or earn nothing.
  • Practise with the official mock tests on the GATE website.

What to do next

Read the syllabus guide in this series for your paper — XL, PH, CY or MA — and match the pattern to the syllabus: 55 subject questions across the sections you must cover. Then read the preparation guide for a study plan that fits the three-hour paper, and practise with previous years’ question papers, which the official GATE website publishes. If you have not yet chosen a paper, the guide on GATE for science students explains eligibility and the four science papers, and the research guides page lists the whole series. The exams and admissions hub lists exam guides on the site. Related guides: GATE overview, syllabus and preparation plan.

Frequently asked questions

How many questions are there in a GATE paper?

65 questions — 10 from General Aptitude and 55 from the subject.

How long is the GATE exam?

Three hours. Candidates with a benchmark disability are eligible for one hour of compensatory time.

Is there negative marking in GATE?

Only for multiple choice questions: 1/3 of a mark for a one-mark MCQ and 2/3 for a two-mark MCQ. There is no negative marking for MSQ or NAT questions.

What is General Aptitude worth in GATE?

15 marks in every paper, from 10 questions covering verbal, quantitative, analytical and spatial aptitude.

Can my total marks be negative?

Yes. The official FAQ states that net total marks for some candidates may be negative, because wrong MCQ answers deduct marks.

Sources checked

Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top